This smoke purifier is only compatible with Pixi 3W/5/10W and Pixi 1064 machines.

It filters harmful factors such as PM2.5, PM10, and formaldehyde generated by carving and cutting wood, leather, and acrylic, with a purification rate of up to 99.97%. The purification flow rate is up to 258m³/h, and the wind speed is up to 38m/s. The purification speed is at an excellent level in the industry.

It is recommended to use a protective box to purify the air through the air transmission pipeline, which can greatly increase the engraving and cutting effect.

The noise level of the machine is 68±3 decibels, which is roughly the sound level of a normal street environment.

The inner diameter of the smoke purifier 2.0's flue pipe is φ50mm.

The inner diameter of the flue pipes in the Smart Dust Box 1.0 and 2.0 is φ72mm, which is larger than the inner diameter of the smoke purifier 2.0's flue pipe. Therefore, there is no direct compatibility, but assembly can be achieved using tape or adapter pipes.

No, the smoke purifier packaging includes a power adapter that can convert 100~240V household voltage. However, please ensure that the plug is compatible with your home's electrical outlet.

The flue pipe in the Pixi package and the smoke purifier 2.0's flue pipe are the same, so either one can be used.

No, it's not supported. Therefore, you need to open the top cover to check when you notice a significant decrease in the purifier's suction power.

There are three possible reasons for this problem:

1. The air inlet is blocked.

2. There is a foreign object stuck in the exhaust pipe.

3. The filter is saturated.

Solutions are as follows:

1. Turn off the power, open the top cover of the device, and check if the air inlet is blocked by foreign objects.

2. Check if the exhaust pipe is blocked by foreign objects.

3. If the suction power returns to normal after removing the filter, then the filter needs to be replaced.