Applicable to cylindrical, spherical, ring-shaped and conical objects.

The maximum supported diameters are: Cylinders: 1-120mm, Spherical objects: 25-150mm, Rings: 11-100mm.

The length of the object depends on the direct placement distance from the side, and is generally applicable to normal objects under this diameter.

For special objects, please bring photos and ask technical support.

If you purchase an AlgoOS product, please click Settings-Machine-Working Mode-ARC and enter the relevant parameters for the object to be engraved.

Refer to the instructions to connect the cables and place them, and then you can start engraving.

For other machines, refer to the tutorials in the instructions and modify the code to adapt the relevant work.

Before carving, make sure the carving surface is kept level, the jaws are locked, and use a test piece to test parameters and carving before carving.

To prevent damage to the carving.