Stainless Steel Metal Phone Holder
AlgoLaser DIY KIY MK2 with 1064 laser module
Line 1/Speed 1
300
Power
100%
Line Interval
0.05mm
Pass
1
How Laser Engrav a Metal Phone Holder
In today’s digital world, a phone holder is a practical accessory for keeping your device secure while working, driving, or watching videos. Why not take it a step further and customize your phone holder with laser engraving? With the AlgoLaser DIY KIT MK2 Laser Engraver and a 1064nm 2W Infrared Laser Module, you can create a unique and stylish phone holder with a custom design.
This step-by-step guide will walk you through the process, ensuring a professional finish. Let’s dive in!
Before you begin engraving, you need to set up the 1064nm laser module on your DIY KIT MK2:
1. Replace the 1064nm laser module by inserting it into the slot on the back panel of the engraver.
2. Plug in the cable to ensure a secure connection.
3. On the machine’s touchscreen, click "Settings" and navigate to the "Laser" option.
4. Select the 2W 1064nm module to activate the appropriate laser settings for metal engraving.
This step ensures that your laser engraver is properly configured for engraving on metal surfaces.
1. Place the phone holder into the engraving area, ensuring it is stable and level.
2. Adjust the focal length of the laser module by moving the laser head closer or farther from the surface.
3. Click on "Control" and reset the laser module to ensure it starts from a proper baseline.
Proper positioning is essential for achieving a clean and accurate engraving result.
Once your phone holder is in place, it’s time to select your engraving design and configure the settings.
1. Choose an image for engraving—let’s go with the "Cool Monkey Boy" design.
2. Set the engraving parameters for the metal phone holder:
Fill-Speed: 300mm/min
Power: 100%
Line Interval: 0.05mm
Pass: 1
3. Adjust the size and position of the image to fit perfectly on the phone holder.
The correct settings will ensure that the engraving is sharp, detailed, and durable.
1. Run a border check to ensure the design is aligned properly.
2. Double-check that the laser module is focused correctly.
3. Click "Start Engraving" and watch the laser engraver etch your design onto the metal phone holder.
4. The engraving process will take a few minutes, depending on the complexity of the design.
Once the engraving process is complete:
1. Carefully remove the phone holder from the engraving area.
2. Use a microfiber cloth to clean off any residual dust or debris.
3. Inspect the engraving to ensure it is clear, precise, and properly aligned.
4. If necessary, run an additional pass to deepen the engraving.
Your custom metal phone holder is now ready to use or gift!
1. Do I need software to engrave?
No, the AlgoOS system allows you to engrave directly from the machine without additional software.
2. Can I engrave detailed designs on metal?
Yes, the 1064nm infrared laser module is optimized for engraving metal with high precision.
3. Will the engraving wear off?
No, laser engraving creates a permanent mark that will not fade over time.
4. How do I clean the engraved phone holder?
Use a microfiber cloth to gently wipe away any dust or residue.
5. What should I do if the engraving is too light?
Try increasing the power setting or running an additional engraving pass.
6. Can I engrave other metal items with the same settings?
Yes, these settings work well for most anodized aluminum and stainless steel surfaces.
Engraving a metal phone holder with a laser engraver is a fantastic way to personalize your accessories. By following these five steps, you can create a stunning and durable design with ease. The AlgoLaser DIY KIT MK2 with a 1064nm 2W Infrared Laser Module makes the process straightforward, ensuring high-quality results every time.
Now that you’ve mastered this engraving project, why not explore more metal engraving possibilities? Happy engraving!
Thanks for subscribing!
This email has been registered!
